And why the unfair names goofy and regular? Well the terms originally come from surfing – with some crediting ‘Goofy’ to the 1937 Disney cartoon Hawaiian Holiday.

When you stand on your board, your feet will be spread apart. Go for a wide stance and you’ll get better stability, while a narrower stance helps the board carve a turn better. As a starting point, to decide your stance width, measure the distance from your heel to your kneecap.

Alternatively, stand with your legs shoulder width apart and wriggle your feet outwards a little until it feels comfortable and stable. Measure the distance between the middle of your feet.

Stretch the measuring tape between the inserts and mark your chosen stance width against the nearest set of holes, ensuring the distance to the nose is NOT shorter than the distance to the tail.

If you’re still unsure, then most boards provide a reference stance on the inserts which you can use until you figure out what works best for you.

And as for how far forward or backwards you go on the board – again this is personal preference, but the general rule of thumb is that if you intend to ride powder, then you need to set your stance ‘back’ an inch or so on the board, and if you wish to ride park, or at least occasionally ride your board backwards (or ‘switch’ as it’s known), then put your stance closer to the centre, if not completely centered.

Find more information on setting up your stance with Burton’s Channel system here.

Next, carefully line up your binding over your chosen insert holes, and place a washer and screw above each.

Lightly screw down the first, then repeat for the remaining three. Doing it like this means you have a little wriggle-room to line up all the threads.

Once all four screws are engaged, screw them down tightly.

Flip down the footbed and press firmly into place.

Now strap into your board and see how it feels. If the width or angles are uncomfortable, adjust them again.

Bindings have so many changeable parts because they’re meant to be experimented with. There are a ton of other variables like forward lean, highback pivoting and canting that can make a difference to how your board feels.

While you might not know what ‘your’ stance is right now, by playing with your board and bindings – both on and off the hill – you’ll quickly develop an idea of what you like and what you don’t like. Write down what those angles and measurements are, and you’ll be able to set up any board to match so you’re similarly comfortable.

For more info on fine-tuning the straps and other features on the bindings, see our next episode.